GEOS Professional RAM Print

From Software Archive
Revision as of 01:17, 14 November 2026 by Enigma (talk | contribs) (Disk protection traced (track 36 signature missing on this disk), patched G64 with reconstructed track 36)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

GEOS Professional RAM Print, a print buffer for GEOS 64/128 V2.0 by Stefan Milcke, published by the GEOS User Club (J. Heinisch & T. Haberland GbR): the multitasking system RamProcess and the program PrintBuffer let GEOS print in the background from a RAM expansion while the user continues working. Additionally the disk contains the RamPrinter driver, a clock (Uhr) running as RamProcess task and SaveSystem.

Source 1

Property Data
Title GEOS Professional RAM Print
Publisher and/or Developer GEOS User Club (J. Heinisch & T. Haberland GbR), Stefan Milcke
Year 1991
Disk(s) 1
Number of Index Holes 1
Media Type 5.25 DSDD
Retail, Budget or Compilation (with name) Retail
Country of Release DE
Language(s) German
Platform C64/C128
NTSC or PAL PAL
Protection Signature on track 36, checked by InstallPB (see Disk protection)
Working? no (Stream), yes (patched G64)
Archived 10 Aug 2021 Stefan_h@F64
Verified by enigma

Disk label: "Geos User Club, Ram Print, Die auf diesem Datenträger enthaltenen Dateien sind urheberrechtlich geschützt. J. Heinisch & T. Haberland GBR, Geos User Club, Xantenerstr. 40 D-4270 Dorsten 19".

The manual ("für Commodore C=64/C128/C128D und GEOS 64/128 Version 2.0") is dated June 1991 (Stefan Milcke) and November 1991 (Thomas Haberland).

Disk contains (Ram Print): InstallPB (SFX archive, dated 21 Mar 1994), RamProcess V1.7, PrintBuffer V1.1, RamPrinter (printer driver V3.0), PrintBuffer.cfg, PB Bitte lesen !, Uhr_V1.0, SaveSystem V1.0

Disk protection

InstallPB unpacks PrintBuffer (a self-extracting archive, "Install-PrinterBuffer, Written 1991 by Stefan Milcke") only if the signature on track 36 is present:

  • The code of InstallPB is XOR encrypted ($1A) and decrypts itself on start. It needs the disk driver of GEOS 64 2.0 (under GEOS 1.x it stops with "Kann Routinen nicht finden !") and a drive configured as 1541.
  • It sends drive code that steps to track 36, sets the bit rate of speed zone 0 and searches the byte stream, without waiting for a sync, for the bytes $2F $53. The next 5 bytes are the key. In a following loop every sync on the track changes the first key byte.
  • The key decrypts the archive (XOR with a 5 byte period). The GEOS CRC of the first $400 bytes must be $4275, otherwise the check is repeated (10 attempts) and the program stops with "CRC - Fehler ! Installation abgebrochen.".
  • PrintBuffer itself reads the GEOS serial number, but does not write it into its file.

On this disk track 36 contains only a sync-less 01 pattern (all flux intervals have the same length in the KryoFlux stream). The signature is missing: the drive reads the key $55 $55 $55 $55 $55 or $AA $AA $AA $AA $AA, and InstallPB stops with "CRC - Fehler !" (verified in VICE 3.10 with GEOS 64 2.0). PrintBuffer could therefore not be installed from this disk any more.

Patched G64

The key was determined from the encrypted archive: only with the key AC 94 A5 29 4A the archive decrypts to valid 6502 code with the texts "Install-PrinterBuffer" and "Written 1991 by Stefan Milcke", and the CRC is $4275 (frequency analysis of the 5 key positions, confirmed by the CRC). From the 5th bit on the key consists of the bit pattern 01010 repeated, i.e. GCR coded $00 bytes. The original track 36 therefore most likely contained the marker $2F $53 followed by GCR coded zeros; its exact content is unknown.

In the patched G64 only track 36 was replaced, tracks 1-35 are unchanged: speed zone 0, no sync, repeated units "$2F $53 $AC $94 $A5 $29 $4A" followed by GCR coded $00 bytes. Every unit is 8n+1 bits long, so the drive code finds an aligned marker with every byte framing. Tested in VICE 3.10 with GEOS 64 2.0: InstallPB reads the key at the first attempt, the CRC is $4275 and the archive is unpacked.

Streams

File:Streams RAM Print stefan h.zip

G64

File:RAM Print stefan h s0 patched.g64 (track 36 patched, see Patched G64)

Disk side 1 is empty.

Manual

Anleitung